 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC10EP31 D Flip Flop with Set and Reset The MC10EP31 is a D flip flop with set and reset. The device is pin and functionally equivalent to the EL31 and LVEL31 devices. With AC performance much faster than the EL31 and LVEL31 devices, the EP31 is ideal for applications requiring the fastest AC performance available. Both set and reset inputs are asynchronous, level triggered signals. Data enters the master portion of the flip-flop when CLK is low and is transferred to the slave, and thus the outputs, upon a positive transition of the CLK. http://onsemi.com 8 1 SO-8 D SUFFIX CASE 751 * * * * * * * * * * 275ps Typical Propagation Delay High Bandwidth to 3 Ghz Typical PECL mode: 3.0V to 5.5V VCC with VEE = 0V ECL mode: 0V VCC with VEE = -3.0V to -5.5V 75kW Internal Input Pulldown Resistors Q Output will default LOW with inputs open or at VEE ESD Protection: >4KV HBM, >200V MM Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 75 devices MARKING DIAGRAM 8 HEP31 ALYW A L Y W = Assembly Location = Wafer Lot = Year = Work Week 1 *For additional information, see Application Note AND8002/D PIN DESCRIPTION PIN CLK Reset FUNCTION ECL Clock Inputs ECL Asynchronous Reset ECL Asynchronous Set ECL Data Input ECL Data Outputs Positive Supply Negative, 0 Supply SET 1 S 8 VCC Set D Q, Q D 2 D Flip Flop 7 Q VCC VEE CLK 3 R 6 Q TRUTH TABLE D SET L L H L H RESET L L L H H CLK Z Z X X X Q L H H L UNDEF RESET 4 5 VEE L H X X X Z = LOW to HIGH Transition Figure 1. 8-Lead Pinout (Top View) and Logic Diagram ORDERING INFORMATION Device MC10EP31D MC10EP31DR2 Package SOIC SOIC Shipping 98 Units/Rail 2500 Tape & Reel (c) Semiconductor Components Industries, LLC, 1999 1 January, 2000 - Rev. 3 Publication Order Number: MC10EP31/D MC10EP31 MAXIMUM RATINGS* Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Parameter Value -6.0 to 0 6.0 to 0 -6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC VDC VDC mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. DC CHARACTERISTICS, ECL/LVECL (VCC = 0V; VEE = -5.5V to -3.0V) (Note 3.) -40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 1.) Output HIGH Voltage (Note 2.) Output LOW Voltage (Note 2.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current Min 26 -1135 -1935 -1210 -1935 Typ 34 -1060 -1810 Max 44 -885 -1685 -885 -1610 150 Min 26 -1070 -1870 -1145 -1870 25C Typ 35 -945 -1745 Max 45 -820 -1620 -820 -1545 150 Min 28 -1010 -1810 -1085 -1810 85C Typ 37 -885 -1685 Max 47 -760 -1560 -760 -1485 150 Unit mA mV mV mV mV A IIL Input LOW Current 0.5 0.5 0.5 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. VCC = 0V, VEE = VEEmin to VEEmax, all other pins floating. 2. All loading with 50 ohms to VCC-2.0 volts. 3. Input and output parameters vary 1:1 with VCC. http://onsemi.com 2 MC10EP31 DC CHARACTERISTICS, LVPECL (VCC = 3.3V 0.3V, VEE = 0V) (Note 6.) -40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 4.) Output HIGH Voltage (Note 5.) Output LOW Voltage (Note 5.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current Min 26 2165 1365 2090 1365 Typ 34 2240 1490 Max 44 2415 1615 2415 1690 150 Min 26 2230 1430 2155 1430 25C Typ 35 2355 1555 Max 45 2480 1680 2480 1755 150 Min 28 2290 1490 2215 1490 85C Typ 37 2415 1615 Max 47 2540 1740 2540 1815 150 Unit mA mV mV mV mV A IIL Input LOW Current 0.5 0.5 0.5 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 4. VCC = 3.3V, VEE = 0V, all other pins floating. 5. All loading with 50 ohms to VCC-2.0 volts. 6. Input and output parameters vary 1:1 with VCC. DC CHARACTERISTICS, PECL (VCC = 5.0V 0.5V, VEE = 0V) (Note 9.) -40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 7.) Output HIGH Voltage (Note 8.) Output LOW Voltage (Note 8.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current Min 26 3865 3065 3790 3065 Typ 34 3940 3190 Max 44 4115 3315 4115 3390 150 Min 26 3930 3130 3855 3130 25C Typ 35 4055 3255 Max 45 4180 3380 4180 3455 150 Min 28 3990 3190 3915 3190 85C Typ 37 4115 3315 Max 47 4240 3440 4240 3515 150 Unit mA mV mV mV mV A IIL Input LOW Current 0.5 0.5 0.5 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 7. VCC = 5.0V, VEE = 0V, all other pins floating. 8. All loading with 50 ohms to VCC-2.0 volts. 9. Input and output parameters vary 1:1 with VCC. http://onsemi.com 3 MC10EP31 AC CHARACTERISTICS (VCC = 0V; VEE = -3.0V to -5.5V) or (VCC = 3.0V to 5.5V; VEE = 0V) -40C Symbol fmax tPLH, tPHL Characteristic Maximum Toggle Frequency (Note 10.) Propagation Delay to Output Differential CLK->Q, Q S, R->Q, Q tRR tS tH tSKEW tPW tJITTER Set/Reset Recovery Setup Time Hold Time Duty Cycle Skew (Note 11.) Skew Part-to-Part Minimum Pulse Width CLK, SET, RESET Cycle-to-Cycle Jitter 550 175 200 225 150 150 250 280 150 50 50 TBD TBD 450 TBD 550 325 360 200 250 200 150 150 275 330 140 50 50 TBD TBD 450 TBD 550 350 420 250 325 185 150 150 320 400 130 50 50 TBD TBD 450 TBD ps 400 475 ps ps ps ps Min Typ 3.0 Max Min 25C Typ 3.0 Max Min 85C Typ 3.0 Max Unit GHz ps tr Output Rise/Fall Times ps tf (20% - 80%) Q, Q 50 120 180 60 130 200 70 150 220 10. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 11. Skew is measured between outputs under identical transitions. Duty cycle skew is defined only for differential operation when the delays are measured from the cross point of the inputs to the cross point of the outputs. http://onsemi.com 4 MC10EP31 PACKAGE DIMENSIONS SO-8 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q http://onsemi.com 5 MC10EP31 Notes http://onsemi.com 6 MC10EP31 Notes http://onsemi.com 7 MC10EP31 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MC10EP31/D |
Price & Availability of MC10EP31
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |